Product Introduction
Application
Product Parameter
YNL-M4
INDUSTRIAL EQUIPMENT
High precision
Easy to install
Small size saves space
No insertion loss
Strong anti-interference ability
Product Introduction
The sensor series of open loop type Hall current sensor is insulated between the primary and secondary, which is used to control and measure small DC current.
A measuring module that uses the Flux gate principle to convert the measured DC current into a DC current or voltage signal proportional to the current output.
Product Parameter
Main electrical parameters
|
额定测量电流
IPN(mA)
|
测量范围IPM(mA) |
型号
|
| 5 | 0 - ±20 | YNL-0005M4 |
| 10 | 0 - ±40 | YNL-001M4 |
| 50 | 0 - ±100 | YNL-005M4 |
| 100 | 0 - ±200 | YNL-010M4 |
| 200 | 0 - ±400 | YNL-020M4 |
| 500 | 0 - ±800 | YNL-050M4 |
| 额定测量输出 VM | ±5V (4V) |
| 负载电阻 RM | ≥10kΩ |
| 电源电压 VC | ±12V 或±15V （±5%） |
| 电流消耗 IC | ≤20mA+输出电流 |
| 一次侧回路对二次侧回路之间耐压 | 3kV/50Hz/1min |
Dynamic performance parameter
| 准确度 X | ≤2.0%（+25℃） |
| 线性度 εL | ≤1.0%（+25℃） |
| 零点偏移电压 VO | ≤±50mV（+25℃） |
| 零点温度漂移 VOT | ≤±100ppm /℃（-25℃～+85℃） |
| 响应时间 Tr | ≤300ms |
General parameter
| 工作温度 TA | 储存温度 TS | 重量 M |
| -15℃～+80℃ | -25℃～+85℃ | 102g |
